

This product is part of the following categories:
Daiwa Crosscast Z 13' 3.75lbs Emblem Carp 45 SCW QD Set (x4)
Daiwa Crosscast Z 13' 3.75lbs Rod
For fishermen for whom grip quality and lightness are key elements. These thin blanks allow casting at a distance in all conditions and offer sufficient power reserve to counter powerful starts.
- High modulus carbon blank reinforced 1K woven
- Reverse fitting
- American Tackle 50mm Starter Ring
- Fuji tubular screw reel seat
- Handle with rubber grip
- Powerful progressive action
- Best compromise with carp category reels from size 45


Technical Information | |||
Length | Parts | Test Curve | Rings |
13' (390cm) | 2 | 3.75lbs | Minima |
Fuji reel seat
American Tackle Rings
Daiwa Emblem Carp 45 SCW QD Reel
The 45mm profile is recognised as the ultimate spool size for big distance casting. This new generation of Emblem utilises a reduced oscillation speed called Slow Cross Wrap, enhancing the line lay. The result is lower consumption of casting energy during line release, when combined with the friction reducing double lip profile of the LC spool increases casting distance by more than 5%.
Supplied with a shallow C and spare deep LD spool; (300m – 0.35mm and 530m – 0.35mm). The C spool allows filling of three spools from 1000m.
Retrieval is geared down at 4.9:1 but still cranks up to 104cm per handle turn.
- 45mm LC long cast spool
- Slow Cross Wrap
- QD Quick drag
- HIP-High Impact Line Clip
- Air Rotor
- Digigear II
- Machine cut aluminium handle
- Soft touch handle knob
- Supplied with C shallow spool and spare LD deep spool
Technical Information | |||||
Bearings | Ratio | TMV | Capacity | Spool add. | Weight |
6+1 | 4,9:1 | 104cm | 530m /0.35mm 300m/0.35mm | 1 | 615g |
HIP-High Impact Line Clip
Machine cut aluminium handle
Daiwa sharp design
Quantity | Ref | Name | ![]() |
---|---|---|---|
4 x | 251802 | Daiwa Crosscast Z 13' 3.75lbs Rod | ![]() |
4 x | 202692 | Daiwa Emblem Carp 45 SCW QD Reel | ![]() |
Products related to this item:





