Carp Design Estart EV 230 Camo Extend 58lbs Navigation Pack

Carp Design Estart EV 230 Camo Extend 58lbs Navigation Pack

Carp Design Estart EV 230 Camo Slat Floor Boat

The Estart 230 is a pneumatic boat designed according to rigorous specifications, meeting specific expectations in terms of safety and use.

This new "EV" version has some head-turning improvements! Its interior space has been increased by 20% with the dashboard set back and the two flanges spaced out. Soft grips replace the old hard grips. We have also added reinforcement strips on the underside and two side straps to allow you to attach your landing net or rod when removing your rod. The camouflage has also been improved to make it more discreet than the old one. In short, you will have understood, this new boat is a little jewel! 

Made from a 0.7mm PVC made from 1000D Realtree Brown camouflage color polyester with beautiful effects, it has three independent inflatable tubes with high pressure valves.

Like all models in the Estart range, its shape has been reworked to optimize its load volume, the goal being once again to meet as close as possible the carp anglers' needs and expectations.

Indeed, the diameter of the tubes has been reduced, the transom has been retracted to the maximum, its width has been increased and the shape of the bow (front) has been rounded to not lose space relative to to certain models of the market who possess a pointed bow.

This model is a good compromise for carp anglers looking for a small boat that is quick to install. The Estart 230 can be used on small bodies of water as an annex or main boat in large lake with its tubes of 36cm in diameter.

The presence of a transom allows it to be easily motorized but also easily attach a support for echo sounder.

It has a removable sliding bench that will be very useful when navigating with a motor or simply that you move the oar to adjust to your physiognomy.

• New wider version

• Two soft handles at the back for easy transport

• Reinforcing strips on the bottom

• Lifeline on top of the socks

• Side straps for landing net or rod

Carp Design Estart+ Extend 58lbs 12V Electric Motor

For this new range of motors, we wanted to make our own contribution to the protection of the environment by selecting a production site with RoHS approval and under TÜV Rheinland certification.

The Estart+ Extend range is the logical evolution of our engines. Our experience in the field has enabled us to offer you a new series that is even more adapted to the needs and requirements of carp anglers.

The head box has been completely redesigned to allow the handle to stretch, making it easier to use the motor when you are standing in your boat during a fight, a trip or just dropping your rig. 

The control box is always equipped with a 9-LED light bar that indicates the battery level to avoid any inconvenience when you are on the water.

The Estart+ Extend has a trigger near the motor mount that allows you to tilt the motor with a simple push (9 positions), while a screw ring on the arm allows you to adjust the depth of immersion of the propeller.

They work with a 12V battery (battery not included) and are available in 3 different powers (40lbs, 58lbs and 66lbs) in order to be able to meet all the needs and adapt to each type of boat. 

The power cables have clips at the ends so that we can connect the motor to the battery (battery not included) in a flash. For optimal use, we recommend that you use a marine battery (slow discharge of at least 80Ah) and above all that you wear a life jacket. 

• Control system: patented high current speed switch
• Mounting system: 9 position mounting bracket
• MOGEN carbon brush - double life
• All aluminium carbon brush holder
• Streamlined motor head
• Professionally tested propeller angle
• All copper rotor for better cooling effect long life all in operation
• Improved fuel system
• Porsche-inspired design
• Tilting/Extendable Tiler: stretches for maximum control
• Powerful stand: made of aluminium composite, reliable at high speed
• Level Lock Bracket: 10-position bracket features a quick-release lever lock and reinforced composite material that resists bending, warping and UV damage

• Power: 58lbs
• Thrust: 26.31kg
• Speed control: Continuous
• Motor type: Brushless direct drive motor
• Rated voltage: 12V
• Propeller depth adjustment: clamp
• Propeller type: 3 blades
• Number of forward speeds: 5
• Number of reverse gears: 3
• Rated speed (rpm): 1000
• Rated current (A): 34Ah
• Rated power (W): 612W
• Control handle: fixed 15cm
• Shaft length: 76.2cm
• Maximum speed: 8-10km/h
• Weight: 10.8kg
• Dimensions: 100cm x 48cm x 16cm
• Warranty: 2 years
• Product designed with RoHS approvals
• TÜV Rheinland certification

What is the RoHS directive?

The Restriction of Hazardous Substances (RoHS) Directive limits the use of ten hazardous substances commonly used in electrical and electronic equipment (EEE). The aim of the directive is twofold: to reduce pollution and prevent environmental damage caused by the restricted materials, for example during recycling or waste disposal, and to reduce the health risks associated with their exposure.

TÜV Rheinland certification: proof of quality for your products:

The independent body TÜV Rheinland checks that products comply with the relevant European regulations by affixing the CE mark as a guarantee of quality and conformity.