Carp Design X-Touch 3D Elite Black X-Slide Detection Pack

Carp Design X-Touch 3D Elite Black X-Slide Detection Pack

Carp Design Elite Black 3 rods Rod Pod

Lovers of beautiful products will love this rod pod and you will be surprised by the level of finish that the Elite Black will offer you.

Ultra light (only 820g), the Elite Black is made of high quality black anodized aluminum, it benefits from a very "British" style thanks to an exceptional level of machining.

Fully adjustable, it will quickly become a great ally for carp anglers looking for a stable, versatile, space-saving and lightweight rod pod!

For those who use Long Cast reels, the width of the buzz bars has been reworked so that the reels do not touch each other.

The presence of a ring under the buzz bar sliders will allow you to easily align your detectors and rod rests. In order to provide good grip whatever the time of year (especially in winter), the adjustment screws are serrated to provide an optimal grip.

As you will have understood, the Elite Black is a jewel that will make many carp anglers envious at the water's edge given its exceptional quality/price ratio!

• Very "British" sleek style
• Color: black
• Made of anodized aluminum
• Buzz bar 3 rods
• Alignment ring under the buzz bar sliders
• Body length adjustable from 51 to 81cm (distance from buzz bar to buzz bar)
• Leg length adjustable from 17 to 24cm
• Width of buzz bars adjustable from 26 to 46cm
• Height of buzz bars adjustable from 9.5 to 12cm
• Delivered in a carrying bag

Size (bag dimensions): 87cm x 18cm x 8cm - Weight (excluding carrying bag): 820g

Very "British" sleek style, exceptional level of machining

Central bar adjustable from 51 to 81cm (distance from buzz bar to buzz bar)

Goal Post attachment of the buzz bars

Telescopic adjustable feet

Adjustable buzz bar height

Quick assembly and installation

Adjustable buzz bars length

Serrated adjustment screws to provide an optimal grip

Sliders with detector alignment ring

Screw thread protected by machined aluminum cap

Comes with its carrying bag

Carp Design X-Touch 3+1 Bite Alarms Set

Behind their sleek look, the X-Touch series hides high-performance electronics that offer a high level of technicality.

Indeed, in addition to the functions that will be listed below, the central unit allows you to remotely adjust the volume, tone and sensitivity of the detectors so that you can change them from your bivvy without having to move in the event of unpredictable weather (wind, rain, etc.)!

The detectors are equipped with adjustable multi-color LEDs (6 colors to choose from) that will allow you to configure your battery according to your tastes and desires and your central unit will synchronize simultaneously (6 colors per channel).

The X-Touch have 8 levels of volume, tone and sensitivity adjustments to allow you to adapt to all fishing conditions.

They are equipped with the "drop back" function which allows the fisherman to distinguish thanks to the right diode whether it is a return key or not. Indeed, the colored diode remains fixed if it is a return key while it flashes in case of departure towards the open sea.

Benefiting from a latest generation transmitter, they will guarantee you a perfect connection with the control unit within a radius of 150m.

The frames of the detectors and the receiver are made from a high-strength ABS material with special reinforcement at the screw thread to guarantee you increased robustness against time and the elements that you may encounter at the water's edge.

For fans of luminous pendulums, a 2.5mm jack socket is present under the detectors and provides a 20-second delay to the connected pendulums.

• 8 levels of volume, tone and sensitivity adjustment
• 6 colours available: red, green, blue, yellow, purple and white
• 20-second LED timer on the detector and receiver
• 2.5mm jack socket for light accessories
• Low battery warning on the detector and receiver
• Memory function on the detectors and receiver (retains settings)
• Adjustment buttons on the front
• 150m range in open areas (range varies depending on the environment)
• Routing function that ensures that your detector does not interfere with other users
• Vibrator function on the receiver
• Designed to withstand bad weather
• Frame made from high-strength ABS materials with special reinforcement at the screw thread
• Non-slip pads on the rod rest
• The detectors and receiver operate with a 9V battery (batteries not supplied)
• Delivered in a shockproof protective case

Non-slip pads on the rod rest

High visibility multi-colored diodes

Frame made from high-strength ABS materials

Socket for luminous accessories

X-Touch Series: Sleek look, high-performance electronics and high technicality

150m range in open area (range varies depending on the environment)

The detectors and receiver operate with a 9V battery (batteries not supplied)

Delivered in a shockproof protective case

Carp Design 3 Hangers X-Slide Neon Set

The X-Slide Neon is a versatile hanger that will appeal to medium and long distance fishing enthusiasts thanks to its 15g head (excluding chain). Versatile, it offers great sensitivity whatever your fishing style.

It has a high visibility injection-moulded opaque acrylic head and has a central location that can accommodate an isotope (not supplied).

A removable serrated cap allows the insertion of the isotope and allows the window and line clip to be perfectly aligned.

They are equipped with a 22cm anodised black ball chain, a black machined aluminium fixing bracket and a black "Pivoting Ball Clip" line clip that guarantees perfect maintenance of the line body.

Benefiting from a superb level of finish, the X-Slide Neon will meet the expectations of the most demanding carp anglers.

• High visibility opaque acrylic head
• Isotope slot (not supplied)
• Black "Pivoting Ball Clip" line clip
• 22cm ball chain
• Weight of the head alone: ​​15g
• Total weight (excluding mounting bracket): 28g
• Delivered in a shockproof storage box
• Color: green, yellow and red

High visibility opaque acrylic head with "Pivoting Ball Clip" line clip

Total weight (excluding mounting bracket): 28g

Carp Design Magnet Action Rod Rest (x3)

The Magnet Action is a technical and innovative rear support designed to ensure a good hold on your rods.

The central part of the bracket is equipped with a spring system that allows the bracket to be locked or unlocked. When pressed down, the upper part of the bracket closes, preventing your rod from jumping out in the event of a violent take.

When you pick up the rod (via the lever action), the Magnet Action opens and releases your rod effortlessly.

The part on which your rod butt rests is equipped with a rubber pad to give you a better grip.

Compatible with all carp rods with a butt diameter of 20mm or less.