Atropa Atrotube V2 Additionnal Head 90cm Transparent

After meticulously probing the water, you have found an ideal area 60 meters from the bank. It only remains to bait and drop your rigs. Only here, arrived on the edge you turn and face the expanse of water, you have trouble locating this famous "HOT SPOT".

Because it is sometimes impossible to take as a reference point as tree, a bouquet of vegetation, a submerged obstacle, or any other element such as a construction, a sunk boat, the company ATROPA has developed two systems that will allow you to mark your fishing area with pinpoint accuracy. 

Atropa Atrotube V2 Additionnal Head 90cm Transparent

After many years and following the evolution of materials, we are pleased to present the Atrotube V2. This new version is made of 100% Polycarbonate. This material, used for car headlights, is more resistant to torsion, UV and breakage.

Designed to automatically adapt to the water depth and compensate for level variations (this is THE strong point of this system which is patented), this head is equipped with a transparent telescopic end and a anchor ring.

This transparent version in polycarbonate is intended for fishermen wanting a low visibility marker for more discretion vis-à-vis other fishermen.

• Total length : 180cm

Tips :

• The upper end of the green tube containing the telescopic part must always be under the surface of the water
• Predict 250g of ballast per meter of submerged tube
• If you use the Atrospot with the Atrotube, firmly push the beacon into the reducing sleeve
• Adjust the height of the tube / beacon assembly on the water by adding if needs a ballast of 10g in the reducing sleeve
• Do not exceed 10kg to anchor an Atrotube
• Tighten the anchor with the broken ring tightly so that it does not unscrew when retrieving the assembly and unscrewing the extensions
• Do not store in the sun - risk of deformation of elements
• 1 year warranty under normal use

Reducer sleeve for Atrospot

Illustration image made from the model Fluo Yellow