Anatec Pac Boat Start'r Camo Wood AN-i6X Bait Boat + Baiting Kit Amorce Plus

Anatec Pac Boat Start'r Camo Wood AN-i6X Bait Boat + Baiting Kit Amorce Plus

Anatec Pac Boat Start'r Camo Wood AN-i6X Bait Boat

With its small size and surprising ease of use, the Pac Boat is the perfect beginner's boat.

Thanks to a higher deck, the waterline has been increased which improves buoyancy. At the same time, the capacity of the bait box has been increased from 1kg to 1.5kg.

Compared to its brothers (Monocoque S and Catamaran), the Pac Boat benefits from minimal dimensions and low weight for ease of transport and use.

The Pac Boat is designed to meet the growing demand of some users for whom a bait boat remains indispensable, but who do not wish to be burdened with a model that could hinder a more "mobile" approach to their fishing.

Some of Graupner's electronics have been replaced by standard components (speed controller and servo motor).

The AN-i6X remote control benefits from 2.4 GHz technology and is equipped with the AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) developed and patented by FLYSKY. Offering superior interference protection while maintaining low power consumption and reliable high sensitivity reception, FLYSKY's AFHDS technology is considered one of the leaders in the RC market today.

The Pac Boat's minimalist design gets to the heart of the matter, no unnecessary gimmicks, tensioning your lines and baiting your fishing spots with precision is the essential function of this boat that beginners will have no trouble getting the hang of. 

It has a digital voltage monitor to check the battery voltage instantly.

The Pac Boat is powered by a propeller motor and two 6V 4.5Ah lead batteries. The boat has a range of about 80 minutes and a maximum speed of 1.6m/sec.

The steering is provided by a rudder mechanism.

Located in the rear position, the Pac Boat's priming tank has a capacity of 1.5kg. This tray allows the transport of the bait and the line.

Delivered complete with:

• 2 Batteries 6V / 5Ah
• 1 grease gun 
• Charger included

Dimensions: 59cm x 28cm x 25cm - Weight: 4.5kg (including batteries)

Propeller and rudder details

Bottom of the boat

AN-i6X Remote Control

This ANATEC AN-i6X remote control has been co-developed with the manufacturer FLYSKY, the reference on the model radio control market. This 6-channel radio control has an outstanding price-quality ratio and is very easy to use.

The AN-i6X transmitter and AN-i6X receiver form a 6-channel 2.4GHz AFHDS 2A digital proportional R/C system. (Upgradable to 10 channels)

The AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) developed and patented by FLYSKY. Offering superior interference protection while maintaining low power consumption and reliable high sensitivity reception, FLYSKY's AFHDS technology is considered one of the leaders in the RC market today.

Omnidirectional Gain Antenna

The high efficiency omni-directional high gain antenna reduces interference, while using less power and maintaining a strong, reliable connection.

Bi-directional communication

Capable of sending and receiving data, each transmitter is capable of receiving temperature, altitude and many other types of sensor data, servo calibration and i-BUS support.

Low power consumption

The system is built using highly sensitive, low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, greatly extending battery life.

Unique identity recognition system

Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems from accidentally connecting or interfering with the systems' operation.

Multi-channel hopping frequency

Click here for Additional Battery

Baiting Kit Amorce Plus for Anatec Pac Boat & Monocoque Bait Boats

Users of Anatec Monohull and Pac Boat bait boats will be delighted!

Made in France, this easy and quick to install priming kit will allow you to "customize" your boat by increasing its priming capacity.

It will also allow you to increase its stability thanks to the presence of side floats to avoid "rolling" and prevent any overturning of the loaded boat when turning around on the water.

Supplied complete, you will only need to assemble it a first time and make the connections on the boat by following the use instructions in order to make your kit operational.

You will then be able to simultaneously open the hatches from your remote control whenever you want. Its ingenious fixing system will guarantee you a safe and ultra-fast installation on your baitboat.

In addition, our Amorce Plus Priming Kit is made from 80% recycled plastic.

Details of the items supplied in the box:

• 1 x Amorce Plus kit
• 6 x stainless steel screws
• 1 x connection cable
• 2 x float
• 2 x hull support
• 1 x Torx key

Dimensions: 75.5cm x 38cm x 26.5cm – Weight: 1.56kg

Increases the stability of your bait boat

Easy and quick to install priming kit

High lift side floats

Increases the priming capacity of your baitboat

The design of the Amorce Plus priming kit prevents rolling

Complete technical design and great ergonomics of use

Fits on Anatec Pac Boat and Monohull baitboats

Carry more baits and increase your chances of catch

Avoids back and forth movements that wear out the batteries very quickly

Simple and secure installation

High quality support brackets

Click here to download the user manual